Aervoe ProChef-1800 Induction Cooktop User Manual download pdf

Pro-Chef

™

- 1800

Commercial Induction

OPERATING INSTRUCTIONS

TABLE OF CONTENTS

Page

Section 1 Important Warnings & Safeguards .....................................1

Section 2 Parts Identiﬁcation .............................................................1

Section 3 Selecting the Proper Cookware...........................................2

Section 4 Operating Instructions ........................................................2

Section 5 Care & Maintenance ...........................................................4

Section 6 Troubleshooting Guide & Customer Service .......................4

Section 7 Cooking with Induction Interface Disks ..............................5

Section 8 Speciﬁcations .....................................................................5

Section 5

CARE AND MAINTENANCE

• Do Not clean with metal souring pads, abrasives, or solvents

• Do Not immerse cord or unit in water or other liquids

• Unplug when not in use and before cleaning

• Allow unit to cool before storing

• Do not place objects heavier than 65 pounds on the glass cooktop

• Do Not use if ceramic cooktop or power cord is damaged

• Keep away from other sources of heat

• Unplug and let cool before cleaning. Use a mild liquid detergent with a moist cloth to

wipe off grease and stains. Let dry. Cover the unit to protect it from dust when being

stored. Use a stainless steel cleaner for best results.

Section 6

TROUBLESHOOTING GUIDE & CUSTOMER SERVICE

If after reviewing the troubleshooting guide the problem is not resolved, do not attempt to

repair yourself. Contact your dealer or call our Customer Service Department at 1-800-227-

0196 for additional information.

After plugging in the power cord, the Power Indicator light does not illuminate and/or the

exhaust fan is not running.

• The plug may be loose in the electrical outlet

• Check your circuit breaker. It may be inoperative and not providing power to the unit.

The power indicator light is on, but the fan is not running and the cookware is not heating up.

• The cookware is unsuitable and it is preventing operation (see Selecting the Proper Cookware)

• The pan needs to be centered on the glass plate

• The glass plate may be cracked

The induction cooktop suddenly stops heating during operation and shuts down.

• The overheating sensor detected an excessive high surface temperature and caused it

to automatically shutdown. Heating empty or improper cookware may cause this (see

Selecting the Proper Cookware).

• The air inlet or exhaust fan is blocked and caused it to overheat

• The unit was accidentally unplugged

• The fuse or circuit breaker has malfunctioned

Error code guide:

If an error code appears in the LED display, follow the instructions for the particular problem.

E0 = Cookware Sensor Detection

Proper cookware is not detected (see Selecting the Proper Cookware).

Remedy

: Place correct cookware back on the cooktop within 30 seconds to reset. Unplug

from the power receptacle. Wait one minute and connect power supply and restart unit,

assuring ﬁrst that proper cookware is placed on cooktop.

E01 = Internal Overheat Sensor

Internal temperature exceeds operation limit, cooling fan malfunction, or inadequate ventilation

for the cooktop.

Remedy

: Unplug from the power receptacle. Make sure that the fan is at least 4” away

from any obstruction. Wait 10 minutes for the cooktop and cookware to cool down, and

then plug it back into the 120V power receptacle. Make sure the fan is running.

E02 = Glass Cooktop Overheat Sensor

Glass cooking surface temperature exceeds the limit of 464°F (240°C), and shuts down after

one minute.

Remedy

: Unplug from the power receptacle. Wait 10 minutes for cooktop and cookware

to cool down and reconnect to the power receptacle. Restart, checking that the cooling/

exhaust fan is running and at least 4” away from any obstruction. If the error continues,

try using another size of cookware.

E03 = Incorrect Voltage Sensor

The 120V input power supply is too high or too low voltage and shuts down after one minute.

Remedy:

Unplug from the power receptacle. Using voltage sensor, verify that the voltage

is 110/120V AC. If not, switch electrical outlets or correct before operating the unit.

Note:

If any of the above remedies fail to correct the problem, please contact Customer Service

at 1-800-227-0196.

Section 7

COOKING WITH INDUCTION INTERFACE DISKS

The Induction Interface Disk (#6010) is an accessory that allows you to use cookware that

is not induction-rated (not ferrous or magnetic metal). It acts as an interface between your

non-magnetic cookware and the induction cooktop to transfer the heat to the non-magnetic

cookware. When cooking in this manner, you can expect efﬁciency to drop compared to

using induction-rated cookware. The beneﬁt is that you don’t have to replace your current

cookware. Always follow the instructions included with the Induction Interface Disk when

using it with the Induction Cooktop unit. Item #6010 is sold separately, and is available on our

website at www.aervoe.com.

Section 8

SPECIFICATIONS

Aervoe Industries, Inc.

Gardnerville,NV89410•(800)227-0196

www.aervoe.com•mailbox@aervoe.com

6500inst CS:10/12

Max Burton is a registered trademark of Aervoe Industries, Inc.

Power Source............120V/60Hz 15 amp circuit

Output .......................500 - 1800 watts

Power Levels .............1-7 (500 - 1800w)

Temp Range .............. 100ºF - 464ºF (38º - 240ºC)

Weight.......................15.5 lbs. (7kg)

Dimensions ...............12.87” x 15.35” x 3.94”

(33x38x10cm)

Glass Cooktop Size ...11” x 11” (28 x 28cm)

Cord Length .............. 5 ft. (1.5m)

Safety Features

1. Non-suitable cookware detection

2. Overheat protection

3. Improper voltage supply detection

Approvals

ETL approved to UL 197 requirement

ETL Sanitary approved (NSF-4)

FCC approved to Part 18

1 2

Summary of Contents

Page 1 - Pro-Chef

Pro-Chef ™ - 1800Commercial InductionOPERATING INSTRUCTIONSTABLE OF CONTENTS PageSection 1 Important Warnings & Safeguards ...

Page 2 - ProChef™ - 1800. Model #6500

FunctionOn/Off ButtonHeating ButtonTemperature ButtonUp/Down ButtonsFunction LockTimerCooktopLCD DisplayNOTE: This equipment has been tested and found

Comments to this Manuals

No comments

Aervoe ProChef-1800 Induction Cooktop User Manual

Browse online or download User Manual for Stoves Aervoe ProChef-1800 Induction Cooktop. Aervoe ProChef-1800 Induction Cooktop User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Stoves Aervoe ProChef-1800 Induction Cooktop